FG
Modellsport 1/5 and 1/6 Scale |
 |
FG - 4 Block 05 Adjust Clutch for Zen or Cy Motor - Complete Set - 1:5 or 1:6
Part # FG10530 |
$133.59
|
 |
FG - Long Aluminum Shock (1) All Racing Trucks, Off Road 1:6
Part # FG06481 |
$33.89
|
 |
FG Wheelie Bar Kit- Monster, Off Road, and Race Trucks 1:5
Part # FG6295 |
$90.49
|
 |
FG Front Aluminum Upright Set- Monster, Marader, Off Road, and Race Trucks 1:5
Part # FG6103/6 |
$141.19
|
 |
FG Rear Aluminum Wishbone set- Monster, Marader, Off Road, and Race Trucks 1:5
Part # FG6478 |
$105.79
|
 |
FG Rear Aluminum Shock Tower - Monster, Off Road, and Race Trucks 1:5
Part # FG4475 |
$99.49
|
 |
FG On Road 2 speed conversion kit - Part # FG7450 |
$231.49
|
HPI
1/5 Scale and 1/8 Scale Gas |

Click on picture for larger image!
|
This is the 1/5 scale, gasoline powered, radio controlled, HPI Baja 5B SS Buggy - KIT.
** New factory high performance options for 2014 include;
** Steel Exhaust Header,
** 8000RPM High Response Clutch,
**
Aluminum Alloy Diff Case
** Super Heavy Duty Dogbones,
** Super Heavy Duty Front Hubs
** One-Piece Rear Uprights
FEATURES:
Chassis: Narrow channel monocoque design 0.16" (4mm) thick,
gun-metal gray in color, constructed of aircraft grade 6061 T6 aluminum, side guards protect engine from dirt and debris
Drive: Rear wheel gear drive with heavy duty dogbones
Engine: Fuelie 26S gas engine with pull starter, quick release foam air filter, primer, choke and kill switch
Steering servo: SFL-11MG Servo, metal gear/24.7kg-cm6.0Vg (HPIM2772)
Ball Bearings: Full set included
Shocks: Four VVC heavy duty aluminum shocks with 5 externally adjustable dampening settings and dual rate springs for progressive dampening action on all surfaces, modified rear shock tower brace
Main Gear: 57 tooth composite construction Gearbox: Sealed, heavy duty metal gears
Differential: Viscous Torque Control can be tuned using different weight diff oils, hardened metal planetary gears, aluminum alloy diff case
Brakes: Ventilated dual disc
Clutch: 2-shoe, 8000 RPM
Gas Tank: 25.3 oz (750cc)
Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (60mm) wide 6.7" (170mm) outer diameter
Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (80mm) wide, 6.7" (170mm) outer diameter
Wheels: Black 5-spoke, nylon 3-piece bead lock, bead is bolted to wheel to hold tire securely in place-no need for tire glue
Body: Clear pre-cut Rear Wing: Molded black plastic with decals applied
Roll Cage: Baja style high impact nylon protects engine and body from crash damage
Suspension: Fully adjustable, long travel double wishbone Caster: Adjustable, with shims 22 / 25.5* stock / 29 degrees caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited, valid only in USA, Canada and South America
INCLUDES: HPI Baja 5B SS kit, engine, steering servo, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease body, with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual, 3.4oz (100cc) Z191 2-cycle oil
REQUIRES: Radio: 2-3 ch FM or 2.4GHz with standard size servo for throttle (do not use AM radio) Receiver Battery: 6V hump configuration, at least 3000mAh Battery Charger: Timed or peak for receiver pack Unleaded Gasoline: 87-93 octane, mix gasoline and two cycle oil at 25:1 ratio, Transmitter Batteries: AA, number depends on selected transmitter Paint: Spray or brush-on for polycarbonate bodies Building and track equipment.
Price $899.99 + $50 oversize shipping = $949.99
Part # HP112457 |
$949.99
Over size shipping charge has been added
|

 |
HPI Baja 5B RTR w/D-Box2 - RTR
This is the 1/5 scale Gasoline Powered, 2.4GHz Radio Controlled Ready to Run Baja 5B Buggy with D-Box2 Stability Control System.
FEATURES:
Chassis: Box style aluminum, 0.16" (4mm) thick, with front and rear skid plates Drive: Rear wheel, rubber CVD boots
Radio: TF-45 2.4GHz 3-channel FHSS with failsafe, D-Box2 Stability Control System with adjustable sensitivity for greater stability during cornering, or less control for all-out drifting
Engine: Fuelie 23CC 2-stroke gas engine with high flow muffler and protective roll cage
Clutch: 8,000 RPM performance clutch Differential: Viscous torque Fuel Tank: 700cc
Shocks: Long stroke VVC/HD, aluminum body, externally adjustable piston
Disc Brakes: Dual steel plates, vented
Receiver Battery: 6V 3000mAh
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited through manufacturer beginning at date of purchase
INCLUDES: RTR 5B Buggy with D-Box2 Stability Control System, 2.4GHz Radio, 23cc gasoline Engine, 100cc bottle of 2-stroke oil, Body, Receiver Battery, four AA Batteries REQUIRES: Unleaded Gasoline: 87-93 octane, mix gasoline and oil at 25:1 ratio
SPECS: Length: 32.2" (817mm) Front Width: 18.1" (460mm) Rear Width: 18.9" (480mm) Height: 10" (255mm) Ride Height: 3" (76mm) Weight: 21.3lbs (9.6kg)
Over size shipping ($50) charge has been added to base price
Part
# HPI 113141 |
$1179.99
Contact Us
Over size shipping charge has been added to base price
|
 |
HPI High Response Clutch Shoe/Spring Set - 8000 RPM (Red)
The stock Baja 5B clutch starts to engage at 6000 RPM and is fully engaged at 7000 RPM, the High Response set engages at 8000 RPM and is fully engaged at 10,500 RPM, which launches the Baja 5B at higher RPM for more punch off the line. To achieve this goal we have specially designed lighter clutch shoes and a stronger clutch spring.
Part # HPI15448 |
$38.29
|
 |
HPI 5B/T WHEEL NUT 24mm (ORANGE/4pcs)
Part # HPI87494 |
$13.19
|
 |
HPI 5B/T WHEEL NUT 24mm (PURPLE/4pcs)
Part # HPI86468 |
$13.19
|
 |
HPI Baja 5B Complete Gear Diff w/1000 Oil
Part # HPI87466 |
$85.29
|
 |
HPI Baja 5B Polished Tuned Pipe Set
Part # HPI86690 |
$119.99
|
 |
RPM Front Upper & Lower A-arms (fits all versions of the Baja 5B & 5T) - BLACK
Part # RPM82142
|
$24.39
|
 |
RPM Rear Upper & Lower A-arms (fits all versions of the Baja 5B & 5T) -BLACK
Part # RPM82252 |
$22.59
|
 |
RPM Rear Upper & Lower A-arms (fits all versions of the Baja 5B & 5T) - Dyeable White
Part # RPM82251 |
$22.59
|
 |
Rear Bumper (fits all versions of the HPI Baja 5B & 5T - BLACK
Part # RPM81982 |
$16.49
|
|
|
|